Products and Services made in JapanSitemap
Japanese Dies & Molds products made in Japan for easy access to buyers
 
Made in Japan Products and Services Made in Japan
Made in Japan Made in Japan
Made in Japan Made in Japan
Made in Japan
Offers to Sell
Made in Japan
Made in Japan
Offers to Buy
Made in Japan
Made in Japan Made in Japan
August 28, 2008, 7:29 pm
Made in Japan
Made in Japan
View Gooooogled Versions
   Dies & Molds

Sample Products
FZ-78 Series WaveguideType Devices Pigtailing System FZ-78 is the system of alignment for waveguide and optical fiber arrays and fixing them with optimal position. UV curing is also available.
Inserting emitted light power by LD light source to Input side of waveguide through input side fiber array. And receiving outputted light power from output side of waveguide through output side fiber array.
FZ-78 Series WaveguideType Devices Pigtailing System
Moritex Corporation

Pick and Place Full range of industrial actuators. Selectable from amny cylinder strokes. 
The cylinder stroke is adjustable between a minimum of 25mm (1in.) and a maximum of 200mm (7.9in) 
(25-mm notch)
Pick and Place
Nihon Pisco Co., Ltd

UV monitor Optical monitors to measure UV absorbance of column effluents at the wavelength of either 280 or 254 nm in low-pressure liquid chromatography. The dual-beam and the dual silicone photodiode detector ensure the measurement with low noise and long-term stability over wide environmental temperature range, affording reliable operation in a cold room. An economy type featuring 0.0005 AU noise level, 0.0002 AU/h stability, 5 sensitivity ranges and a high-grade type featuring 0.0002 AU noise level, 0.0005 AU/h stability, 9 sensitivity range as well as sophisticated operations.
UV monitor
Atto Corporation

More Categories
Dies & Molds
made in japan made in japan
made in japan
made in japan
 
made in japan
made in japan made in japan
made in japan
 
New site for importers of unique Japanese office supplies and stationeries
Looking for Japanese Office Supplies, Stationeries and Equipment? Click Here
Q. How did the Samurai Regulate their time in old age Japan?
How did they know it was time to set off for war?
Japanese antique clock replica and repairs by Sumiya Japanese antique clock repair and replica by Sumiya A. They used these Japanese Antique Clocks you can find at Sumiya.
You too can get one made for you.
Featured products made in Japan Featured Listing
KOHZU Precision Co., Ltd Standard Positioning Stages, Controllers and Drivers, Fiber Optic Alignment Stages, and other Custom-made products. KOHZU Precision Co., Ltd Kanagawa Kawasaki
Standard Positioning Stages, Controllers and Drivers, Fiber Optic Alignment Stages, and other Custom-made products.
Machinery & PartsMachine PartsLinear Stages

Nikki Denso Co., Ltd Nikki Denso Co., Ltd. has been contributing to Servo systems over 40 years since established as a dedicated manufacturer having a main theme that “Development of dynamic power which fully satisfies any human command”. For new dynamic epoch, the role of industries is remarkably changing to satisfy high information technology, globalization, and change of individual value, life style and so forth. 
 
Nikki Denso Co., Ltd. will develop more reliable production system as a FA control unit manufacture mainly for AC servomotors and widely contribute to society as a specialist of life related environment equipment and facilities. Nikki Denso Co., Ltd Kanagawa Kawasaki
Nikki Denso Co., Ltd. has been contributing to Servo systems over 40 years since established as a dedicated manufacturer having a main theme that “Development of dynamic power whic...
Industrial SuppliesMotor & Electric MotorServo Motor

Akashi plastics Industry Co., LTD Hyogo Akashi
Technology of compressing and injecting plastics 1. ( Equivalent to wide range of precision resins from thermosetting resins to engineering plastics ) Designing and manufacturi...
Industrial SuppliesPlastic Material & ProductsPlastic Engineering

Musashi Engineering, Inc To deal effectively with the wide variety of dispenser applications, MUSASHI is applying the world's most advanced technical capabilities, based on the long pursuit of unique technology and years of experience in advanced dispensers. MUSASHI responds to every dispensing need in each industrial field, including electronics such as semiconductors, liquid crystal displays, communications, and electronic parts. Musashi Engineering, Inc Tokyo Mitaka
To deal effectively with the wide variety of dispenser applications, MUSASHI is applying the world's most advanced technical capabilities, based on the long pursuit of unique techn...
Machinery & PartsFactory Automation EquipmentAutomated Equipment

Habuki Habuki is Japanese maker of Kimono (traditional dress). Using world class dyeing technology we are able to imprint all kinds of pictures on any type of cloth.

We produce home decoration furniture  for traditional Japanese homes as well as for decoration of public places, hotels, theaters etc. 
Made with the same kimono technology, these items are a combination of tatami mat materials, hand painted kimono cloth and wood.
We are looking for partners who may be interested in distributing these products in your country. Habuki Niigata Tokamachi
Habuki is Japanese maker of Kimono (traditional dress). Using world class dyeing technology we are able to imprint all kinds of pictures on any type of cloth. We produce home de...
FurnitureFurniture PartsFurniture Accessory

Featured Products
Personal Communication Antenna Personal Communication Antenna
YOKOWO CO., LTD
Internal Antennas(an original Yokowo technology) realize high performance over 5 bands and are recognized in the industry as being the world's first quatro band antennas. Our inter.......

Copen Copen
Daihatsu
Now everyone can experience the excitement of open-air cruising, with exhilarating performance that opens the door to your wildest dreams. Only Daihatsu's expertise and passion f.......

T.S.K Hot-air Generator T.S.K Hot-air Generator
Taketsuna Manufactory Co., Ltd
This is the hot-air generator that the heater, controller, and heatproof electric blower were unified and the continuation unattended operation is possible on 365th. Guarantee p.......

Compact Design Hydraulic Cylinder Compact Design Hydraulic Cylinder
Taiyo Ltd
Space save design compact design Hydraulic Cylinder 1) 35S-1 Series 3.5MPa, Aluminum body. - The seal material is nitrile rubber. - Rod end specification has two type, male .......

Speakers Speakers
Alphine
Some systems can get loud but sacrifice clarity. Why butcher your music? Add Type-R speakers and prepare to enjoy your music. Type-R speakers deliver solid performance – superior l.......


 
made in japan made in japan made in japan
made in japan
Matsuya for baby food and other products made in Japan
Baby food, Emmergency releif food, food for the elderly and hospitalized persons
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Sell your products in Japan and beyond
Sell Your Products in Japan!
Display them Here
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Dried Hanabiratake Powder (Sparassis Crispa)
100% dried Hanabiratake Power
We are Selling in bulk for use as raw material to health supplement manufacturers.
Please contact us for more details
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan

made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan Ministry of Economy, Trade and Industry
You can get statistics on machinery, equipment and other industrial manufacturing
trends in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan External Trade Organization
Japan External Trade Organization promotes import and export trade in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Invest in Japan
Lots of opportunites in Japan. Find out how you can take advantage now.
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
Mistubishi Canter All low bed, Reinforced dump
Mistubishi Canter
AutoX Japan
Precision Square Levels For precision inspection, this product is a JIS mark display permitted Grade A product. 
The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjusted. 
It has a V groove, making it possible for measurement of tubular type shapes. 
In relation to the base, the accuracy of parallelism and squareness of all sides is assured. 

Other products include;
Precision Square Level Grade A 
Precision Flat Level Grade A 
Square Level 
Flat Level 
Small Precision Level 
Adjustable Level (Starlet Type) 
T-Type Level 
Precision Fix Level 
Petite Level 
Level for Spinning Machine 
Cross Test Level 
Pocket Level 
Bench Level 
Water Level 
Round Type Level 
Inclination Level with Micrometer 
Inclination Measurement Level A100 Type 
Inclination Level
Precision Square Levels
Obishi Keiki Seisakusho
Liquid Level Detector LIQUID LEVEL DETECTION has long been a specialty of SANTEST CO. Among specially ordered probes have been units with flanges instead of the standard threaded mount, special diameter probes, curved probes and a wide variety of materials for acidic or alkaline fluids of all temperatures.
Our floats can be supplied as all Teflon or PEEK, welded by proprietary methods developed in the SANTEST labs or as all titanium suitable for use with corrosive fluid.
Liquid Level Detector
Santest Co., Ltd
Vacuum Glove Box Systems The vacuum glove box system can be used for handling(i) a solid, powder, or a liquid which is unstable in the air, (ii) a radioactive substance and (iii) a very toxic substance. After forcibly evacuated in a short period of time by a vacuum pump, the system inside is hermetically filled with predetermined inert gas (N2, Ar, He, dry air or the like) up to a normal pressure. Operations can be executed through the gloves. A specimen is put in and out through the antechamber. The attachment of a gas recycling purification system makes it possible to maintain the system inside at a highly pure inert gas atmosphere for a long period of time.

Features:
- Both the main body and the antechamber can be evacuated, resulting in rapid gas exchange and high reliability. 
- The sight window is large and the window glass can readily be attached and removed, enabling a specimen to be put in and out through the sight window. 
- At the side of the main body, the antechamber has a sliding door, enabling the main body inside to be effectively utilized. 
- The antechamber has a slide table, enabling a specimen to be readily put in and out. 
- The pressure in the main body can be maintained constant by an automatic inner pressure regulator (optional). 
- When a special glove port (patent pending) is used, a damaged glove can be exchanged without the glove box inside atmosphere injured (optional).
Vacuum Glove Box Systems
Miwa Mfg. Co., Ltd
Considering the number of companies and products made in Japan, we at first thought it would be impossible to create a catalog of products made in Japan.
However, for various reasons, we came to a conclusion that Japanese companies wishing to export their products does not mean all companies. In addition due to language barriers etc., some companies in Japan still find it difficult to publish information about their products and services in languages other than Japanese. This site aims at eleviating some of the bottlenecks that have hitherto hindered location of Japanese companies and products easily.

Because we have included categories like machinery, industrial supplies, electrical and electronic products, hydraulic and pnuematic equipment, transportation equipment like cars and trucks, optical equipment, etc. At first site it would appear like a machinery and equipment directory. As a matter of fact, our intention is to cover the needs of everyone from chopstics to netsuke, from heavy duty construction equipment to Nishikigoi.
If you did not find what you are looking for, please bear with us as we try to compile a more comprehensive list. Thank You for visiting our site.

About Us  |  Frequently Asked Questions  |  Our Services  |  Looking for Partners  |  Terms of Use  |  Privacy Policy
Copyright © 2001-2006 Placade Japan Co. Ltd All Rights Reserved.
All logos and trademarks in this site are property of their respective owners