Dies & Molds › Injection Molding › Molded Products Made-in-Japan.BZ

Sitemap
Japanese Dies & Molds , Injection Molding , Molded Products products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

July 30, 2010, 4:13 pm

Members Area

Japanese

View Gooooogled Versions

Dies & Molds › Injection Molding › Molded Products

Sample Products

Power monitoring system The power monitoring system can simultaneously measure the electrical energy
recorded at up to 30 watt-hour meters of the three-phase/three-wire and single-
phase/two- to three-wire types, and pulses sent from a maximum of 16-channel
watt-hour meters attached with transmitters. This is suitable for the instrumentation
for systematic power control at large plants. The data collected is stored in a
memory card, CSV-converted by a personal computer and output on a record book.

Power monitoring system
Showa Electronics Co., Ltd

Load Control and Measurement EA/WA/EAF:
The measuring instruments EA/WA/ EAF transmit and record information on the loads and accidents at AC substations and in AC systems of DC substations. They also store the information for 45 days and can record/reproduce it when necessary

ES:
The measuring instruments ES transmits voltage, current, and accident signals of power receiving and feeding systems at DC substations. They also store the information for 45 days and record/ reproduce it when necessary.

Load Control and Measurement
Showa Electronics Co., Ltd

Precision Granite Surface Plate Precision Surface Plate using granite gabbro
It is very hard and superior in wear resistance. secular distortion is minimal, it does not rust, as well as other advantages.
In addition to standard products, we also manufacture with special measurements, hole drilling, screw machining, etc.
We can also make special mounts using square pipe.

Precision Granite Surface Plate
Obishi Keiki Seisakusho

More Categories

Dies & Molds
Injection Molding
Molded Products

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Intelligent Planimeter The KP-21C is a new era of planimeter technology.
Revolutionary and Enhanced Functions.
PLOT-key tracking device with easy One-Touch action.
Advanced features for exceptional cost performance to meet all of your present and future needs.
Intelligent Planimeter
Koizumi Sokki Mfg. Co., Ltd

Dehumidifiers
Orion Machinery Co., Ltd

Ultra Precision Straight Edge and Squares
Obishi Keiki Seisakusho

Rice Gruel (Porridge) Series Our rice gruel series is directly packed tasty and nutrition with the natural flavor of rice. This product is delicious and very good for babies as it contains no artificial ingredients or chemical additives.
Rice Gruel (Porridge) Series
MATSUYA

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly
Time Recording Products
Amano Corporation

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.
Deflection Tester
Obishi Keiki Seisakusho

Input conversion unit The input conversion unit SSC-U3 has a multi-transducer function to convert three-/single-phase voltage and input current and outputs their effective values, active power, reactive power, power factor, and frequency. The unit can be directly connected to data recorders, pen recorders, and other measuring instruments.
Input conversion unit
Showa Electronics Co., Ltd

Memory recorders 107/117/114
Showa Electronics Co., Ltd

Time Information System Products
Amano Corporation

Featured Products

Angle Measuring Equipment
Obishi Keiki Seisakusho

Universal Angle Plate Angular Combination Block Swivel Type Angle Plate Sine Plate Double Type Sine Plate Sine Base Sine Bar Sine Base with Center Sine Bar with Cen.......

Time Recording Products
Amano Corporation

Simple, clean design fits any office decor Large, easy to read dial Surface detection function for correct printing position Perpetual calendar Automatic Daylight Saving ti.......

Precision Square Levels
Obishi Keiki Seisakusho

For precision inspection, this product is a JIS mark display permitted Grade A product. The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjuste.......

Inverter Chillers
Orion Machinery Co., Ltd

- Temperature control accuracy ±0.1deg.C - As much as 65% Energy Saving possible

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Straightness Tester, repeat meters, and roll calipers. Straightness Tester On the granite standard straight edge lower surface, 3 saddle supports are attached. The accuracy s.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Digital Planimeter The most standard model of

Digital Planimeter
Koizumi Sokki Mfg. Co., Ltd

Special Measurement Equipment Universal Type Camshaft Measuring equipment

This eqipment is representative of our [SE 121 Model ] of camshaft shape measurement equipment is a high performance model, with automatic measurement as a presupposition, and detailed data requirement.
For this reason, in many cases, acquisition of operating skills is required for its operation.
Operation of the machine is completely manual because of the assumption that the equipment will also be used on inline processes.
It is a highly versatile camshaft measuring equipment. No special operating skills are required.
Required ideal position angle and lift amount is displayed.
Also the displayed values can be printed out from a special embedded small sized printer.

Special Measurement Equipment
Obishi Keiki Seisakusho

Knitting Machine Parts Cams, mimingers and feeders
In reply to our customers' requirements for complicated patterning, we are in a position to manufacture circular knitting machine parts of a wide variety by means of MC machine tools.

We are making constant endeavor for your laborsaving, reduction of manufacturing cost and production of vaious new products in a small quantity such as plate cams, mimingers and feeders etc.

Knitting Machine Parts
Kondo Seiki Co., Ltd

Change Valve Mechanical & Electromagnetism
Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics.

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum.

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.

Change Valve
Kondo Seiki Co., Ltd