Electrical & Electronics › Fans Made-in-Japan.BZ | Japanese made Products and Services

Sitemap
Japanese Electrical & Electronics , Fans products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

July 30, 2010, 4:22 pm

Members Area

Japanese

View Gooooogled Versions

Electrical & Electronics › Fans

Sample Products

Computer-Dedicated Curvimeter Simply by connecting the CV-98USB to a computer, the length of curved lines can be measured.

Computer-Dedicated Curvimeter
Koizumi Sokki Mfg. Co., Ltd

Straightness Measuring Instruments Straightness Tester, repeat meters, and roll calipers.

Straightness Tester
On the granite standard straight edge lower surface, 3 saddle supports are attached.
The accuracy surface is high precision and light weight.
By moving the slider, straightness can easily be measured.
By performing Zero setting on the master surface plate, it is possible to measure the work absolute value
Rather than a dial gauge, by using a proble with external output, it is possible to perform data processing.

Repeat Meters
Measurement of Surface Plate Flatness, Straightness etc can be done easily.
At 3 points o fthe fulcrum interval 100mm, flat surface unevenness is measured
Before measurement, perform zero setting on the master surface plate.

Roll Caliper
For measuring large rolls.
It is lightweight because light alloy metal is used as the material. (However, the frame is made of Cast Iron )
4 pcs of job run roller have bearings in them and they are precision grinded.
Movement on the roll is slow and smooth.
A special interval graduation is inprinted on the arm. By matching a bracket onto the work measurement figures, it is possible to easily set a Dial Gauge on the roll center of the work.
A 0.01mm graduation dial gauge is supplied with the product.

　・The storage box is designed in such a way that the main body will have to be disassembled before putting it into the box.

Straightness Measuring Instruments
Obishi Keiki Seisakusho

Precision Square Levels For precision inspection, this product is a JIS mark display permitted Grade A product.
The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjusted.
It has a V groove, making it possible for measurement of tubular type shapes.
In relation to the base, the accuracy of parallelism and squareness of all sides is assured.

Other products include;
Precision Square Level Grade A
Precision Flat Level Grade A
Square Level
Flat Level
Small Precision Level
Adjustable Level (Starlet Type)
T-Type Level
Precision Fix Level
Petite Level
Level for Spinning Machine
Cross Test Level
Pocket Level
Bench Level
Water Level
Round Type Level
Inclination Level with Micrometer
Inclination Measurement Level A100 Type
Inclination Level

Precision Square Levels
Obishi Keiki Seisakusho

More Categories

Electrical & Electronics
Fans

Battery Operate Fans Case Fans Ceiling Fan Blades Ceiling Fans Desk Fans Electric Fans Exhaust Fan	Exhaust Fans Fan Blades Mini Fans Other Fans Stand Fans Wall Fans
	Suggest a Category

New site for importers of unique Japanese office supplies and stationeries

Looking for Japanese Office Supplies, Stationeries and Equipment? Click Here

Didn't find what you are looking for?
Please search our site because you may have followed a wrong link. Thank you.

Featured Listing

Orion Machinery Co., Ltd Nagano Suzaka-shi
Manufacturing and selling compressed air dryers, water chillers, dehumidifiers, precision air conditioners, vacuum pumps and their relevant parts and equipment. Over 60 years of ex...
Industrial Supplies › Air Compressor › Compressor Parts

Amano Corporation Kanagawa Yokohama
Time Information System Products Time Recording Products Parking System Products Environmental Products Cleaning System Products Ecology Products
Consumer Electronics › Office Electronics › Office Equip & Supplies

Shinto Sangyo Co., Ltd Osaka Nishi-ku
Exporters and Importers of various kinds of Abrasive Products and Tools. Our handling products include; Industrial Brush, Diamond Brush, Honing Stone, Cutting off Wheel, Sanding Bl...
Pneumatic & Hydraulic Tools › Air Tool › Abrasive Tools

Kondo Seiki Co., Ltd Niigata Mitsuke city
We manufacture various equipment for industrial use including the following; Complete set of water jet nozzles Pattern plate cams for circular knitting machine. Automatic patte...
Building Materials › Plumbing Supply › High Pressure Fittings

F.A. MIYAISHI CO. Ltd Niigata Nagaoka
Aquarium and general fish breeding merchandise wholesale. From large size equipment to small parts, Anything needed for fish breeding. We Specialize in Nishikigoi breeding mater...
Animal & Pet Products › Pet Supplies › Fish Products

Featured Products

	Time Recording Products Amano Corporation
	Simple, clean design fits any office decor Large, easy to read dial Surface detection function for correct printing position Perpetual calendar Automatic Daylight Saving ti.......

	AC current/voltage converters Showa Electronics Co., Ltd
	The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of.......

	Precision V Blocks Obishi Keiki Seisakusho
	2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured. Very convenient for round objects, and other types of inspection or as supporting block (Rec.......

	Precision Square Levels Obishi Keiki Seisakusho
	For precision inspection, this product is a JIS mark display permitted Grade A product. The main bubble tube has a bubble chamber in which the lenght of the bubble can be adjuste.......

	Memory recorders 107/117/114 Showa Electronics Co., Ltd
	When an accident occurs, the memory recorders 107/117S/117H are triggered by a contact output to catch the waveforms before and after the accident, which are sent to the control .......

Pruning Scissors Kabasawa pruning saw is made of a special structure with very thin blade like a with a razor-sharp cut edge. This makes tree branch cutting a happy experience.It cuts without hurting the fabric making water suction very effective.

In order to make it usable for a long period of time, we have adopted the replacement blade method. We invite to do experience this sharpness.

Pruning Scissors
Kabasawa Industry Co, Ltd

Detection, conversion and control Instruments Showa Electronics has other instruments that detect the state of the object to be measured or controlled as an electric signal, converts it into a necessary quantity for analysis, and controls or outputs to media.

Detection, conversion and control Instruments
Showa Electronics Co., Ltd

Precision Granite Surface Plate Precision Surface Plate using granite gabbro
It is very hard and superior in wear resistance. secular distortion is minimal, it does not rust, as well as other advantages.
In addition to standard products, we also manufacture with special measurements, hole drilling, screw machining, etc.
We can also make special mounts using square pipe.

Precision Granite Surface Plate
Obishi Keiki Seisakusho

AC current/voltage converters The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of 0 to 200V into voltage of 0 to 10V. All are lightweight and have excellent frequency characteristics. They can be manufactured separately or as a single unit.

AC current/voltage converters
Showa Electronics Co., Ltd

Memory recorders 107/117/114 When an accident occurs, the memory recorders 107/117S/117H are triggered
by a contact output to catch the waveforms before and after the accident, which are sent to the control office for recording through telephone lines.

Showa Electronics offers a line-up of memory recorders that cover 4 to 88 channels to catch and record the waveforms before and after accidents at the site of accident.

Memory recorders 107/117/114
Showa Electronics Co., Ltd

Inverter Chillers - Temperature control accuracy ±0.1deg.C - As much as 65% Energy Saving possible

Inverter Chillers
Orion Machinery Co., Ltd

Change Valve Mechanical & Electromagnetism
Plungers, nozzles and change valves, which are regarded as the heart of the water jet, have been improved in quality individually at our plant.

Corrosion-proof and durable materials are in use at a piston section of high abrasion. In addition, the abrasion resistance has remarkably raised by providing the plunger with an advanced ceramics.

Any parts are free from consumption due to deformation since our excellent processing technique confines the error to the minimum.

The nozzles require delicate processing technique, however we have succeeded to develope a nozzle of excellent strength and high workability by means of individual method and know how.

Besided the aboves, main air nozzles, sub nozzles and loom heads as well as water nozzles made of stainless steel and ceramics nozzles are being manufactured at our plant.

Change Valve
Kondo Seiki Co., Ltd

Angle Measuring Equipment Universal Angle Plate
Angular Combination Block
Swivel Type Angle Plate
Sine Plate
Double Type Sine Plate
Sine Base
Sine Bar
Sine Base with Center
Sine Bar with Centers
Universal Bevel Protractor
Large Sized Bevel Plate (Motor Drive) Example
Double Type Sine Plate (2-Way Inclination) Example
Motor-driven Sine Table Example
Rotating Tilt Table Example

Angle Measuring Equipment
Obishi Keiki Seisakusho

Special Measurement Equipment Universal Type Camshaft Measuring equipment

This eqipment is representative of our [SE 121 Model ] of camshaft shape measurement equipment is a high performance model, with automatic measurement as a presupposition, and detailed data requirement.
For this reason, in many cases, acquisition of operating skills is required for its operation.
Operation of the machine is completely manual because of the assumption that the equipment will also be used on inline processes.
It is a highly versatile camshaft measuring equipment. No special operating skills are required.
Required ideal position angle and lift amount is displayed.
Also the displayed values can be printed out from a special embedded small sized printer.

Special Measurement Equipment
Obishi Keiki Seisakusho


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Emmergency Releif Food (RiceRN) Nutritionally balanced food mainly for emmergency. Can be eaten instantly by simple addition of water.
It is flaked and can be eaten by babies, children, adults, and aged persons thereby eliminating the need for special provision for babies or aged people.

It contains no meat and therefore can be eaten by people of all religions.

Emmergency Releif Food (RiceRN)
MATSUYA

Data loggers 108/109A/109C Data logger 108:
The data logger 108 uses a microcomputer to process inputs that correspond to various measurements, and stores the data in a memory card,displays the data on a personal computer, and tabulates or outputs to a page printer.

Data loggers 109A/109C:
The data loggers 109A/109C have more elements and functions than the data logger 108. They store data in a memory card and transmit it to the host computer or remote places.

Data loggers 108/109A/109C
Showa Electronics Co., Ltd

Time Recording Products Simple, clean design fits any office decor
Large, easy to read dial
Surface detection function for correct printing position
Perpetual calendar
Automatic Daylight Saving time adjustment
High-quality dot matrix printer for clean, clear printing
Six-column printing
Simple, easy operation
Pay period can be set weekly, bi-weekly, semi-monthly, or monthly

Time Recording Products
Amano Corporation

Deflection Tester Used for Circularity Measurement of shafts, etc.
Parallellism between table upper surface and center is assured.
Center entry/exit is performed by one touch lever.

According to your requirement, we can manufacture variations with carbide center or brolly center, for large work pieces, with encoder, vertical or horizontal, or for any special applications.

Deflection Tester
Obishi Keiki Seisakusho