Products and Services made in JapanSitemap
Japanese Industrial Supplies , Measurement & Calibration , Industrial Scales products made in Japan for easy access to buyers
 
Made in Japan Products and Services Made in Japan
Made in Japan Made in Japan
Made in Japan Made in Japan
Made in Japan
Offers to Sell
Made in Japan
Made in Japan
Offers to Buy
Made in Japan
Made in Japan Made in Japan
November 20, 2008, 9:10 pm
Made in Japan
Made in Japan
View Gooooogled Versions
   Industrial SuppliesMeasurement & CalibrationIndustrial Scales

Sample Products
Magnet Analyzer MAD300R/300RA/300A MAD-300R/300AR/300A can measure the magnetic flux distribution of the magnetized cylindrical magnet and analyze the magnetized pulse wave, magnetic flux quantity on each pole, magnetic angle, and area of the magnet. This products can display 3-dimensional analyzed data of Rotational angle (in deg.) on X-axis, Magnetic flux density of the surface (in Tesla.) on Y-axis, and Vertical height (in mm.) on Z-axis, or it can display the 3-dimensional data of Frequency (in Hz.) on X-axis, Magnetic flux (in dB.) on Y-ais, Height (in mm.) on Z-axis. Avaiable to use two-dimensional and also, be conversion to two-dimensional wave from three-one.
Magnet Analyzer MAD300R/300RA/300A
DMT Co., Ltd

Thermometer FG-100 Take Temperature Control for Soldering Iron 

Features:
1) Suitable for Lead-Free Solder
- Good temperature response using a fine CA wire sensor (0.2mm)
- Disposable sensor always maintains accurate temperature measurment (Replace sensor when the measuring point underwent degradation)
- Sensor has the twice service life than conventional ones. 
2) Dimensional Measurement
- Allows you to measure from any desired direction according to tip shape 
3) Auto Shut-Off Function
- If no measurement operation is performed within 3 minutes, the power will be automatically shut off. 
4) MAX HOLD Function
- When the button
Thermometer FG-100
Hakko Corporation

Non-Contact · Contact Aligner 
Non-Contact · Contact Aligner
Union Optical Co. Ltd

More Categories
Industrial Supplies
Measurement & Calibration
Industrial Scales

Obishi Keiki Seisakusho We manufacture and sell precision measuring instruments. Some of our products include; Automatic Measuring Equipment, Special Measurement Equipment, Ultra Precision Straight Edge, Level , Surface Plate , Straightness Measuring Equipment, Straight Edge, Square, Perpendicular Surface Plate, Squareness Tester , V Block , Parallel Block, Dial Gauge Stand, Dial Comparator , Angle Measuring Equipment , Tables, Deflection Tester , etc

We can design and manufacture precision measuring instruments according to your requirement. Please consult with us for any special needs. Obishi Keiki Seisakusho Niigata Nagaoka
We manufacture and sell precision measuring instruments. Some of our products include; Automatic Measuring Equipment, Special Measurement Equipment, Ultra Precision Straight Edge, ...

1


List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan


You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
  • Please Read the information on how to register
  • We will inform you once your registration is approved.
  • After the registration process, you will be able to login with your login information to add products and services.

No relationship           
Featured Products
Flowers on Butterfly Contour Flowers on Butterfly Contour
Tattoo Jeans
This is a service, you send your jeans and we imprint the design. Original design is possible but you can also choose from our line up. Please see our website for details www.t.......

FZ-78 Series WaveguideType Devices Pigtailing System FZ-78 Series WaveguideType Devices Pigtailing System
Moritex Corporation
FZ-78 is the system of alignment for waveguide and optical fiber arrays and fixing them with optimal position. UV curing is also available. Inserting emitted light power by LD lig.......

Sample Preparation System Sample Preparation System
Aloka
Automated opening system, as well as dispensing system, enhances efficacy while preventing infection. The labeling system automatically labels sub samples with the same barcode .......

Control Valves for Hydraulic Excavators Control Valves for Hydraulic Excavators
TOSHIBA MACHINE CO.,LTD
Excellent controllability Energy saving systems Oil leakage virtually eliminated Compact design

Pick and Place Pick and Place
Nihon Pisco Co., Ltd
Full range of industrial actuators. Selectable from amny cylinder strokes. The cylinder stroke is adjustable between a minimum of 25mm (1in.) and a maximum of 200mm (7.9in) (25.......

 

made in japan made in japan made in japan
made in japan
Matsuya for baby food and other products made in Japan
Baby food, Emmergency releif food, food for the elderly and hospitalized persons
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Your chance to become a distributor of products made in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Sell your products in Japan and beyond
Sell Your Products in Japan!
Display them Here
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Dried Hanabiratake Powder (Sparassis Crispa)
100% dried Hanabiratake Power
We are Selling in bulk for use as raw material to health supplement manufacturers.
Please contact us for more details
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Scissors and hand saw products made in Japan by Kabasawa
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan Ministry of Economy, Trade and Industry
You can get statistics on machinery, equipment and other industrial manufacturing
trends in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan External Trade Organization
Japan External Trade Organization promotes import and export trade in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Invest in Japan
Lots of investment opportunites in Japan.
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
Robot Hand Product Extraction Robot Hand
Robot Hand
Yutaka Electronics
Detection, conversion and control Instruments Showa Electronics has other instruments that detect the state of the object to be measured or controlled as an electric signal, converts it into a necessary quantity for analysis, and controls or outputs to media.
Detection, conversion and control Instruments
Showa Electronics Co., Ltd
Ready-Made Stainless Press Drawn Pipe Material : Stainless SUS304L (Austenite type stainless steel)
Processing : Solid Solution Conversion 
Density : t0.25 or t0.3

Ready-Made is a Stainless Press Drawn Pipe which is standardized by its length outer/diameter/density.
The properties of length/outer diameter/density have a total of 172 combinations.
Ready-Made Stainless Press Drawn Pipe
Noguchi Seisakusho Co., Ltd
Other Systems Welding heads hold,compress and send current through the workpiece.
Weld force is a very important control factor along with welding current and weldtime.
Other Systems
MIYACHI Corporation
Considering the number of companies and products made in Japan, we at first thought it would be impossible to create a catalog of products made in Japan.
However, for various reasons, we came to a conclusion that Japanese companies wishing to export their products does not mean all companies. In addition due to language barriers etc., some companies in Japan still find it difficult to publish information about their products and services in languages other than Japanese. This site aims at eleviating some of the bottlenecks that have hitherto hindered location of Japanese companies and products easily.

Because we have included categories like machinery, industrial supplies, electrical and electronic products, hydraulic and pnuematic equipment, transportation equipment like cars and trucks, optical equipment, etc. At first site it would appear like a machinery and equipment directory. As a matter of fact, our intention is to cover the needs of everyone from chopstics to netsuke, from heavy duty construction equipment to Nishikigoi.
If you did not find what you are looking for, please bear with us as we try to compile a more comprehensive list. Thank You for visiting our site.

About Us  |  Frequently Asked Questions  |  Our Services  |  Looking for Partners  |  Terms of Use  |  Privacy Policy
Copyright © 2001-2006 Placade Japan Co. Ltd All Rights Reserved.
All logos and trademarks in this site are property of their respective owners