Products and Services made in JapanSitemap
Japanese Industrial Supplies , Pump , Centrifugal Pumps products made in Japan for easy access to buyers
 
Made in Japan Products and Services Made in Japan
Made in Japan Made in Japan
Made in Japan Made in Japan
Made in Japan
Offers to Sell
Made in Japan
Made in Japan
Offers to Buy
Made in Japan
Made in Japan Made in Japan
November 21, 2008, 12:58 am
Made in Japan
Made in Japan
View Gooooogled Versions
   Industrial SuppliesPumpCentrifugal Pumps

Sample Products
Mitsubishi Canter Guts Custom Type, All low bed
Mitsubishi Canter Guts
AutoX Japan

Xenon light source Xenon light source and metal halide light source are high intensity with white light and suitable for high accuracy system. UV and IR light sources are also available.
Xenon light source
Myutron Inc

High-Precision Laser Soldering Robot System [UNIX-413LII] Noncontact soldering has the following advantages:
- no icicle is formed, 
- any impurities are not mixed into solder, and 
- It is appropriate for control of the solder amount or fine work such as fixing of a part that is difficult to be done. 

This system provides the next generation soldering method that is expected to be applied to lead-free soldering also. 

Since the amount of the wasted solder is far less than that of the Wave soldering or soldering iron system, this system contributes for reduction of industrial waste. In addition, it does not require consumables such as an iron tip and heater, so it is very easy to perform routine maintenance.

The laser diode (fiber coupling type) whose output is high (30 W) is used.

The CCD camera incorporated on the vertical axis onto which laser is irradiated shoots an image of the target point.

Since the laser oscillator section, output control unit and laser head are separated, you can design installation or configuration of the system as desired. This is a small device that uses laser diode. Soldering is available even for a minute work without missing the laser irradiation point. 

While observing an image of the point irradiated with laser on the monitor, teaching operation is available also. You can operate this system safely.

The LCD touch panel equipped with the backlight is used.You can intuitively check various settings such as the laser output power and irradiation time.

The long focal length optical system is adopted so that a large area from the lens to the work can be secured.

Parts around the optical system inside the laser head are shielded from the outside, and the air jet system is incorporated into the robot. Therefore, this structure does not allow any smoke from the soldering flux be blown into the inside easily. This robot can spray nitrogen also.

In Output Control mode, this system allows you to check the laser power and time with observing the waveform displayed on the LCD panel. It can store up to 32 output conditions also.

The dual structure of protective glass blocks any flying flux and/or solder ball. This glass is the sliding type, so it is easy to clean.
High-Precision Laser Soldering Robot System [UNIX-413LII]
Japan Unix Co., Ltd

More Categories
Industrial Supplies
Pump
Centrifugal Pumps

Seikow Chemical Engineering & Machinery, Ltd Products include corrosion-resistant pumps, corrosion-resistant fans/blowers, cooling towers, exhaust gas processing equipment, NOx control equipment, chlorine gas leak detection security systems, white smoke eliminators, deodorizers, biological deodorizer systems, odor preventive duct coverings. Seikow Chemical Engineering & Machinery, Ltd Hyogo Amagasaki
Products include corrosion-resistant pumps, corrosion-resistant fans/blowers, cooling towers, exhaust gas processing equipment, NOx control equipment, chlorine gas leak detection s...

1


List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan


You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
  • Please Read the information on how to register
  • We will inform you once your registration is approved.
  • After the registration process, you will be able to login with your login information to add products and services.

No relationship           
Featured Products
Dust Collector Dust Collector
Showa Denki Co., Ltd
Machines for collecting various types of dust. Products: Dust Collector / Pulse-Jet Dust Collecto / Dust Collector(Calbacket)

JSR Series SCARA Robot (Stepping Motor System) JSR Series SCARA Robot (Stepping Motor System)
Janome Sewing Machine Co., Ltd
The Janome SCARA Robot is a new type of robot, with high performance for low cost. Our user-friendly interface allows quick program changes without the need of a software programme.......

REMOTE CONTROLLER REMOTE CONTROLLER
TOA
The C-RM500 Remote Controller is designed for use in camera-based systems that allow remote control from up to 1.2km away over RS-485 communication lines. It allows video images to.......

Laser Welders Laser Welders
MIYACHI Corporation
-Precision Welding with optical fibers : φ0.1 SI fiber or 0.2 SI fiber -Advanced Pulse shaping Function provides optimum welding schedule in FIXED -Power m.......

Fuel Tanks Fuel Tanks
Tokyo Radiator Mfg. Co. Ltd
Our fuel tanks meet the regulations of Japan, the USA, Europe, and Australia, etc., and can be used all over the world. We have tanks made from sheet metal, from aluminum, and from.......

 

made in japan made in japan made in japan
made in japan
Matsuya for baby food and other products made in Japan
Baby food, Emmergency releif food, food for the elderly and hospitalized persons
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Your chance to become a distributor of products made in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Sell your products in Japan and beyond
Sell Your Products in Japan!
Display them Here
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Dried Hanabiratake Powder (Sparassis Crispa)
100% dried Hanabiratake Power
We are Selling in bulk for use as raw material to health supplement manufacturers.
Please contact us for more details
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Scissors and hand saw products made in Japan by Kabasawa
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan Ministry of Economy, Trade and Industry
You can get statistics on machinery, equipment and other industrial manufacturing
trends in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan External Trade Organization
Japan External Trade Organization promotes import and export trade in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Invest in Japan
Lots of investment opportunites in Japan.
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
PCB Drills / Routers The UNION TOOL range of PCB Drills and Routers are produced on proprietary equipment that is both designed and built in-house. This strategy has enabled our engineers to “Design-In” the highest levels of product quality, utilizing 40+ years of knowledge and experience. This advantage has enabled us to install innovative, industry leading equipment such as the DIS (Automatic Optical inspection System for Drill Point control) and ADP (Automatic Drill Pointer for Micro Drills) much earlier than our competitors. It also ensures we adapt much quicker to the demands of Technology or Capacity, such as the growth in micro drills, but with lower levels of investment that help maintain cost competitiveness. Through this strategy UNION TOOL has attained and maintains it's number one market position.
PCB Drills / Routers
UNION TOOL CO
Linear Motion Products High precision linear motion guides make an essential part of our manufacturing equipment capable of producing micro diameter drills. Union tool was the first in Japan to develop linear motion guides with the crossed roller construction. This unique roller mechanism has realized higher precision and performance than ever before. We have since then used these guides in our production line, but have also made them available in the market. Our unique guides have won a substantial market share. In particular, our super Finish (SF class) products, whose bearing surfaces have nearly a mirror finish, are uniquely of our own. They are often used in applications where high precision and reliability are required, such as optical measuring equipment and medical devices.
Linear Motion Products
UNION TOOL CO
Water Treatment System Equipment Products:  
1) ESS-B : SS Removal Equipment
Water Treatment System Equipment
Togami Electric Mfg. Co., Ltd
Toys We recognize that toys are valuable partners in developing a baby's physical, mental and intellectual growth, therefore offer a variety of safe, creative playthings for infants and toddlers aged 0 to 3. Our line of toys strengthen both the mind and body while encouraging creative interaction between parents and baby. No other company approaches Combi's level of expertise in juvenile products, with the result that Combi toys have earned an outstanding reputation among mothers. Combi will continue to pursue new concepts and products that enrich the development and enjoyment of babies and their families.
Toys
Combi Corporation
Considering the number of companies and products made in Japan, we at first thought it would be impossible to create a catalog of products made in Japan.
However, for various reasons, we came to a conclusion that Japanese companies wishing to export their products does not mean all companies. In addition due to language barriers etc., some companies in Japan still find it difficult to publish information about their products and services in languages other than Japanese. This site aims at eleviating some of the bottlenecks that have hitherto hindered location of Japanese companies and products easily.

Because we have included categories like machinery, industrial supplies, electrical and electronic products, hydraulic and pnuematic equipment, transportation equipment like cars and trucks, optical equipment, etc. At first site it would appear like a machinery and equipment directory. As a matter of fact, our intention is to cover the needs of everyone from chopstics to netsuke, from heavy duty construction equipment to Nishikigoi.
If you did not find what you are looking for, please bear with us as we try to compile a more comprehensive list. Thank You for visiting our site.

About Us  |  Frequently Asked Questions  |  Our Services  |  Looking for Partners  |  Terms of Use  |  Privacy Policy
Copyright © 2001-2006 Placade Japan Co. Ltd All Rights Reserved.
All logos and trademarks in this site are property of their respective owners