Pneumatic & Hydraulic Tools › Air Tool › Abrasive Tools Made in Japan

Sitemap
Japanese Pneumatic & Hydraulic Tools , Air Tool , Abrasive Tools products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

November 21, 2008, 11:28 pm

Members Area

Japanese

View Gooooogled Versions

Pneumatic & Hydraulic Tools › Air Tool › Abrasive Tools

Sample Products

VHF Marine Transceiver IC-M72 The radio with MORE:
More Power (6 Watts)
More Waterproof (IPX8)
More Form Factor (easy to hold and operate)

Compact Body, Great “Form Factor”
A compact design, hourglass body-shape and comfortable side grips give the IC-M72 an outstanding “form factor”. It’s easy to use with just one hand!

Highest available power! 6 Watts
The IC-M72’s 6 Watts of transmit power can carry a conversation a long way. A large capacity 2000mAh Lithium-Ion battery allows for 15-16 hours of operation, under normal conditions.

Impressive Forced Audio
The M72’s impressive audio output (600mW typ.*) is loud enough to hear in most any marine environment, even over loud engine noise.
* 10% distortion, 8ohm load

Submersible PLUS (IPX8)
The IC-M72 offers Icom’s best-ever protection against water intrusion. This radio has been tested to survive after being submersed in 1.5m (4.9ft) depth of water for 30 minutes.

Wide Viewing Angle LCD
A wide viewing angle, high intensity LCD is used in the IC-M72, offering bright, easy to read characters. The bright LCD backlighting and backlit keypad is great for night time operation.

30% Shorter Antenna
The IC-M72’s antenna is engineered to perform with typical Icom efficiency even though it is nearly 30%* shorter than previous Icom marine antenna.
* IC-M72’s antenna length is 115mm; 4 and 17/32 in.

Additional Features:
- Auto scan function to start scanning when receiving no signal
- Auto power save function
- Battery indicator shows remaining battery power in 4 levels
- Instant access to Ch. 16 and Ch. 9 (or call channel)
- Auto WX scan and WX Alert function
- Simple add/delete TAG scanning operation
- Built-in UT-112 compatible voice scrambler (Depending on version)
- AquaQuake draining function emits a vibrating sound and clears water away from the speaker grill

VHF Marine Transceiver IC-M72
Icom Inc

Stainless steel bars for concrete reinforcement Corrosion resistance level is very good to reduce cost steeply compared to normal steel ferro-concrete in terms of lifecycle cost.

Stainless steel bars for concrete reinforcement
Aichi Steel

Pressure-sensitive Adhesive Materials for Printing and Other Applications These are used for various labels, seals and stickers applied to electrical products, foodstuffs, office and home supplies, cars, etc. Noteworthy is the fact that many of our film-based products comply with the UL safety standards of Underwriters Laboratories Inc., and have acquired material certification.

Pressure-sensitive Adhesive Materials for Printing and Other Applications
Lintec Corporation

More Categories

Pneumatic & Hydraulic Tools
Air Tool
Abrasive Tools

Shinto Sangyo Co., Ltd Osaka Nishi-ku
Exporters and Importers of various kinds of Abrasive Products and Tools. Our handling products include; Industrial Brush, Diamond Brush, Honing Stone, Cutting off Wheel, Sanding Bl...

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

CCTV Lens CCTV lenses are suitable for various application with low cost. Filters, extension rings, and adapters for CCTV lenses are available.
CCTV Lens
Myutron Inc

Detection, conversion and control Instruments
Showa Electronics Co., Ltd

Electronic Component Mounting/Placement Machine CM402-M/L
Kawasho Electronics Corporation

Digital Planimeter The most standard model of
Digital Planimeter
Koizumi Sokki Mfg. Co., Ltd

Tube Fitting Coming in a great variety of models, the Tube Fitting is standerd type quick-fitting joints for use in pneumatic piping.
Tube Fitting
Nihon Pisco Co., Ltd

Projection Lenses
Tamron Co., Ltd

Tapping Collets P.C.M. Tapping Collets (ET1-1-12, 16, 20, 25, 32) are applicable to our EY Tool Change Adapter and EY Chuck with Straight Shank.
Tapping Collets
Yukiwa Seiko Inc

Linear Actuators MIKI PULLEY linear actuator product group is composed of a unique RB SKID and ROH'LIX. RB SKID is a slip-type linear guide with rice-bran-based RB ceramics (porous carbon material) on the sliding part. 6 precision ball bearings are fixed with a uniform lead angle to convert a rotational motion into linear motion. Each product is absolutely unique.
Linear Actuators
Miki Pulley Co., Ltd

Replica Clock Construction Construction of antique Japanese clocks replica is the main business of Sumiya Clock Services Japan, using the current high precision technology presently available in Japan for construction of clock parts, we are able to reproduce any clock of any age
Replica Clock Construction
Sumiya Clock Services

Featured Products

Air Pressure Type Dispensers
MECT Corporation

These dispensers can dispense high-viscosity liquids such as solder cream, gold, silver, copper pastes, conductive pastes, epoxy adhesives, UV bonds, grease, etc.

DC Power Supply Photo Sensor
Takenaka Electronic

Excellent IP67 in waterproof The high luminance indication light is adopted. Evolution type of Ultra miniature sensor.

DC, AC Motors and Fan Motors
Tokyo Micro Co., Ltd

Various type of motors from 10 ~ 200mmφ, and composite motors with gear-head, encoder, speed controller etc. IC cooling fans, Cooling fans for devices in general,&#122.......

FL Series Air Leak Tester
Fukuda Co., Ltd

Applied air pressure is used as the test medium, thus making this unit capable of detecting leaks in products that require air-tightness and also evaluates the pass/fail status of .......

Sample Preparation System
Aloka

Automated opening system, as well as dispensing system, enhances efficacy while preventing infection. The labeling system automatically labels sub samples with the same barcode .......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	100% dried Hanabiratake Power We are Selling in bulk for use as raw material to health supplement manufacturers. Please contact us for more details


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Pruning Scissors Kabasawa pruning saw is made of a special structure with very thin blade like a with a razor-sharp cut edge. This makes tree branch cutting a happy experience.It cuts without hurting the fabric making water suction very effective.

In order to make it usable for a long period of time, we have adopted the replacement blade method. We invite to do experience this sharpness.

Pruning Scissors
Kabasawa Industry Co, Ltd

Laser Soldering Robot Low power consumption designed by the laser diode. It is possible to solder non-contact. It is best for soldering to the minute area due to possible to irradiate the pin spot. It is possible to set up the best soldering terms by the laser output control from the robot program. The thin solder supply device is standard equipped. It is possible to memorize the 100 programs and the teaching data of 6000 points. It is hard to enter the dust and small parts to the mechanical part due to use the labyrinth construction.

Laser Soldering Robot
Horiuchi Electronics Co., Ltd

Line Sensor Lens A　lens for line scan camera is required high level of optical design and production process for LCD, lead frame, or film inspection. We offer several types of line scan lenses for various application

Line Sensor Lens
Myutron Inc

Coronet Speed Reducer ER series High Efficiency, High Performance & Compact ER series

Features:
- The Unique Circulute Teeth
- High Precision Machining
- Energy Saving by High Efficiency

Coronet Speed Reducer ER series
Nidec-Shimpo Corporation

Considering the number of companies and products made in Japan, we at first thought it would be impossible to create a catalog of products made in Japan.
However, for various reasons, we came to a conclusion that Japanese companies wishing to export their products does not mean all companies. In addition due to language barriers etc., some companies in Japan still find it difficult to publish information about their products and services in languages other than Japanese. This site aims at eleviating some of the bottlenecks that have hitherto hindered location of Japanese companies and products easily.

Because we have included categories like machinery, industrial supplies, electrical and electronic products, hydraulic and pnuematic equipment, transportation equipment like cars and trucks, optical equipment, etc. At first site it would appear like a machinery and equipment directory. As a matter of fact, our intention is to cover the needs of everyone from chopstics to netsuke, from heavy duty construction equipment to Nishikigoi.
If you did not find what you are looking for, please bear with us as we try to compile a more comprehensive list. Thank You for visiting our site.