Pneumatic & Hydraulic Tools › Cutting Tool › Folding Saws Made in Japan

Sitemap
Japanese Pneumatic & Hydraulic Tools , Cutting Tool , Folding Saws products made in Japan for easy access to buyers

HOME

About This Site

How to Register

Offers to Sell

Offers to Buy

Become a Distributor

January 9, 2009, 8:16 am

Members Area

Japanese

View Gooooogled Versions

Pneumatic & Hydraulic Tools › Cutting Tool › Folding Saws

Sample Products

Low-Pressure Atomization Hand Spray Guns F21L series With a low-pressure atomizing spray gun, the air cap internal pressure is low and the cap air nozzle bore is large, so the airflow velocity drops markedly immediately after the paint is released into the atmosphere.
This slows down the atomization rate, reducing splash back and increasing the amount of paint that adheres to the object.As a result, paint consumption is reduced by about 15 to 30% compared with a multipurpose spray gun. Reducing spattering and splash back not only creates a better work environment, but also reduces spray booth maintenance.

High adhesion efficiency, low spattering-people- and environment-friendly while lowering costs
Exceptional atomization at a very low air cap internal pressure (0.07MPa for pressure feed and 0.05MPa for suction or gravity feed). Less spattering and splash back, higher adhesion efficiency, reduced paint consumption, and an improved work environment.

Lightweight, with a beautiful finish
These spray guns are the lightest in their class. Well-balanced and shaped to fit comfortably in the hand, the die cast body with its beautiful alumite finish provides excellent wear and corrosion resistance.

Low trigger load
By using the same circuit for both the air valve and needle valve, trigger load is reduced by about 20%, reducing operator fatigue over long hours of operation.

Wide pattern width
Even with low-pressure atomization the wide pattern width increases work efficiency.

Easy-to-use, indicator-equipped adjustment screws
The pattern and paint adjustment screws have convenient indicators, and are designed for durability and easy operation.

Low-Pressure Atomization Hand Spray Guns F21L series
Meiji Air Compressor Mfg. Co., Ltd.

Peristaltic pump Peristaltic pump allowing liquid being pumped to be in contact only with the inner wall of tubing. Suitable for low-pressure liquid chromatography, gradient formation and other laboratory applications.

-- Single channel
--0.2 to 1000 ml/h wide flow rate range
--1000:1 flow rate control with the same diameter tube
--Remote control capability
--Reliable flow rate repeatability and stability against variation of load, voltage and temperature, with the precision motor speed control utilizing the rotary encoder and frequency-voltage converter system.

Peristaltic pump
Atto Corporation
Tube Fitting Coming in a great variety of models, the Tube Fitting is standerd type quick-fitting joints for use in pneumatic piping.

Tube Fitting Coming in a great variety of models, the Tube Fitting is standerd type quick-fitting joints for use in pneumatic piping.

Tube Fitting
Nihon Pisco Co., Ltd

More Categories

Pneumatic & Hydraulic Tools
Cutting Tool
Folding Saws

Kabasawa Industry Co, Ltd Niigata Nagaoka
Kabasawa Industry Co, Ltd is Japanese manufacturer of pull saws and scissors for tree/flower cutting. With proven technology backed by tradition, and unsrupassed idea creation abil...

List Your Products Here
Japanese Companies only
Foreign Companies looking for
Market in Japan

You need to be a registered user in order to submit your products for lisiting on this site.

Japanese companies: CLick Here
Foreign Companies Looking for market in Japan: Click Here
Please Read the information on how to register

We will inform you once your registration is approved.

After the registration process, you will be able to login with your login information to add products and services.

No relationship

Flow controller
Atto Corporation

Flexible Shaft Automatic Measuring System
TOKYO SEIMITSU CO., LTD

Environment Experiment Equipment
Advantec

Digital Compact Cameras Packed with advanced functions and innovative features, the extensive lineup of PENTAX digital compact cameras offers excellent portability and superb performance.
Digital Compact Cameras
Pentax

Person Following Robot
Toshiba

Juvenile Products
Combi Corporation

Operation Microscope After 1965, a several doctors in Japan gathered privately and formed the
Operation Microscope
Inami Co., Ltd

Linear Motion Products
UNION TOOL CO

Hanabiratake Capsule This product is Hanabiratake 100%. With the supplied spoon, put two spoonfulls into a dish, add hot water, soup, etc., and drink with relish 3 times per day. One bottle contains 50g , you can use it for one month
Hanabiratake Capsule
Echigo Hanabiratake

Featured Products

Swing Robots
Yushin Precision Equipment Co., Ltd

Runner take-out robot for compact molding machines This robot is designed for molding machines with a clamping force of 30 tons or less. Multilingual display selection (opt.......

Zirconia Grinding and Dispersion Media YTZ
TOSOH CORPORATION

- higher density provides a greater impact force resulting in superior grinding efficiency. - smooth surface, almost perfect roundness/sphericity and narrow size distribution, re.......

AJINOMOTO
Ajinomoto Co. Inc

AJI-NO-MOTO" is a world renowned brand for Monosodium Glutamate (MSG). "AJI-NO-MOTO" makes food taste better with a little dash added before, during or after cooking which bring ou.......

Sharp Ear Robot
Toshiba

LN Modulator
Sumitomo Osaka Cement Co., Ltd

SOC's optical modulator design incorporates a Ti-diffused waveguide on LiNbO3 crystal, a traveling-wave type electrode and a tiny polarizer. The composition of these materials, co.......


	Baby food, Emmergency releif food, food for the elderly and hospitalized persons


	Sell Your Products in Japan! Display them Here


	100% dried Hanabiratake Power We are Selling in bulk for use as raw material to health supplement manufacturers. Please contact us for more details


	Do you want to translate your website into Japanese or offer your products and services in Japan?


	You can get statistics on machinery, equipment and other industrial manufacturing trends in Japan


	Japan External Trade Organization promotes import and export trade in Japan


	Lots of investment opportunites in Japan.


	Niigata Industrial Creation Organization

Ultra Precision Straight Edge and Squares Standardized Ultra Precision Straight Edge developed due to the demand for high accuracy Straightness Measurement and Squareness Measurement.
The development concept of ” 1um precision product” is that we standardized the following Size and Specifications. A most appropriate product can be selected depending on the application.

- Can be used as a master forAxis Straightness inspectionin various machine tools, semi conductor related equipment, inspection Equipment, etc.
- Can be used as a straightness standard during Axis assembly adjustment.
- Can be used as inspection master for machine parts.
- The use surface has Precision lapping finishing
- Precision surface is 1 surface only
- The precision surface is graduated excluding 20mm for both edges.
- Hardened

Ultra Precision Straight Edge and Squares
Obishi Keiki Seisakusho

Alnico Standard Magnet Alnico magnet is a casting magnet, being composed of aluminum, nickel and cobalt. Although it tends to be easily demagnetized, it is highly heat-resistant (its Curie point is 850°C) and is not easily broken, thus mechanically strong. It has been traditionally popular for various meters and telecommunication tools, and recently it is used for watt-hour meters as well as anticrime devices.

Alnico Standard Magnet
Magna Co., Ltd

Patient Monitoring Central monitors, Telemetry monitoring systems, Transmitters, Bedside monitors, Sensors, Pulse oximeters, Hand held monitors

Patient Monitoring
Nihon Kohden

AC current/voltage converters The AC current/voltage converters are current transformers to convert AC current of 0 to 40A(IT) into voltage of 0 to 5V. They are also a power transformer to convert AC voltage of 0 to 200V into voltage of 0 to 10V. All are lightweight and have excellent frequency characteristics. They can be manufactured separately or as a single unit.

AC current/voltage converters
Showa Electronics Co., Ltd

Considering the number of companies and products made in Japan, we at first thought it would be impossible to create a catalog of products made in Japan.
However, for various reasons, we came to a conclusion that Japanese companies wishing to export their products does not mean all companies. In addition due to language barriers etc., some companies in Japan still find it difficult to publish information about their products and services in languages other than Japanese. This site aims at eleviating some of the bottlenecks that have hitherto hindered location of Japanese companies and products easily.

Because we have included categories like machinery, industrial supplies, electrical and electronic products, hydraulic and pnuematic equipment, transportation equipment like cars and trucks, optical equipment, etc. At first site it would appear like a machinery and equipment directory. As a matter of fact, our intention is to cover the needs of everyone from chopstics to netsuke, from heavy duty construction equipment to Nishikigoi.
If you did not find what you are looking for, please bear with us as we try to compile a more comprehensive list. Thank You for visiting our site.