Products and Services made in JapanSitemap
Japanese Telecommunication products made in Japan for easy access to buyers
 
Made in Japan Products and Services Made in Japan
Made in Japan Made in Japan
Made in Japan Made in Japan
Made in Japan
Offers to Sell
Made in Japan
Made in Japan
Offers to Buy
Made in Japan
Made in Japan Made in Japan
March 13, 2010, 11:52 pm
Made in Japan
Made in Japan
View Gooooogled Versions
   Telecommunication

Sample products made in Japan Sample Products
Setting Machine ■For setting a saw teeth automatically.
■Any type of blades can be done by NC
Setting Machine
Nakaya Co. Ltd

Temperature & Humidity Control Type Precision Air Conditioning Unit Type : PAU-A920S-HC 

PERFORMANCE:
Temperature control range(ºC) : 20 to 30 
Humidity control range(%RH) : 40 to 80 
Temperature and humidity control accuracy(ºC) : ±0.2 
Humidity control accuracy(%RH) : ±1.0 
Humidification capacity(kg/h) : 2.6 
Cooling capacity(W) : 550/650 
Allowable ambient temperature(ºC) : 20 to 35 
Allowable ambient humidity(RH%) : 10 to 85(No condensation) 

APPEARANCE:
Outside dimensions(mm) : H965×W400×D615(Except flange) 
Weight(kg) : Approx. 80 
Blower duct joint diameter(mm) : o75 
Water supply pipe connection : 15A socket 
Drain pipe connection : 20A socket 
Unit Coating color : Ivory(JPMA Y22-85B semi-gloss) 
Controller Coating color: Dark gray(JPMA Y55-40B semi-gloss) 

ELECTRICAL CHARACTERISTICS: 
Power supply : 3 phase AC200V 50/60Hz 
Maximum operating current(A) : 9.6/9.8 
Maximum operating power(KW) : 3.2/33 

COMPONENTS:
Compressor, Coolant : Rolling piston rotating type, R-134a 
Condenser, Cooler : Fin and tube 
Heater : Sheathed heater with fin(1.0KW) 
Humidifier : Closed pan type(2.0kw) 
Blower air discharge rate
(m^3/min) of Blower fan : 2.8/3.2 
Blower air discharge rate
(m^3/min) of Blower fan for condenser : 8.0/9.4 
Coolant controller : Capillary tube 
Temperature sensor : IC Temperature sensor 
Humidity sensor : Polymer resistor 
Temperature control : Electronic digital setting indicating PID control 
Humidity control : Electronic digital setting indicating PID control 

PROTECTIVE DEVICE:
Main circuit : Ground leakage breaker(20A 30mA) 
Blower fan(For cooler) : Overcurrent relay(Manual reset)(0.28A); Delay timer(For 3 minutes); Surge-absorbing unit 
Compressor : Low temperature operation prevention thermostat(18ºC OFF 20ºC ON); Overcurrent relay(Manual reset)(3A); Motor protector(160ºC OFF 80ºC ON); Surge-absorbing unit 
Heater : Overheat protection thermostat(65ºC OFF 55ºC ON); Thermal fuse(99ºC OFF); Surge-absorbing unit  
Humidifier : Float switch; Thermal fuse(99ºC OFF), Automatic drain timer, Manual drain switch, Surge-absorbing unit 

ALARM DEVICE:
Alarm lamp : Lamp illuminates 
Water supply lamp : Lamp illuminates 
External alarm output:
- Unit abnormality of ALARM : a contact: No voltage(AC250V 5A: Load resistance) 
- Temperature alarm (optional) AL1/AL2 : a contact: No voltage(AC240V 1A: Load resistance)
Temperature & Humidity Control Type Precision Air Conditioning Unit
Apiste Corporation

Pruning Scissors Kabasawa pruning saw is made of a special structure with very thin blade like a with a razor-sharp cut edge. This makes tree branch cutting a happy experience.It cuts without hurting the fabric making water suction very effective. 

In order to make it usable for a long period of time, we have adopted the replacement blade method. We invite to do experience this sharpness.
Pruning Scissors
Kabasawa Industry Co, Ltd

More Products made in Japan More Categories
Telecommunication
made in japan made in japan
made in japan
made in japan
 
made in japan
made in japan made in japan
made in japan
 
New site for importers of unique Japanese office supplies and stationeries
Looking for Japanese Office Supplies, Stationeries and Equipment? Click Here

Didn't find what you are looking for?
Please search our site because you may have followed a wrong link. Thank you.

Featured products made in Japan Featured Listing
Arisawa Mfg. Co., Ltd. Manufacture and sales of electronic materials, optoelectronic materials, electrical insulating materials, industrial structural materials, and so forth.
Among the many Arisawa products are: Electronic materials used in personal computers and cellular phones; and Optoelectronic materials such as Fresnel lenses for projection TV; Electrical Insulating materials; and Structural materials Arisawa products play significant roles in the development of many industries. Arisawa is fully committed to creating the Arisawa Mfg. Co., Ltd. Niigata Joetsu City
Manufacture and sales of electronic materials, optoelectronic materials, electrical insulating materials, industrial structural materials, and so forth. Among the many Arisawa pro...
Dies & MoldsMold Making & DesignCustom Molded Part

TOSHIBA MACHINE CO.,LTD Principal products:
Injection molding machines, die-casting machines, plastic extrusion machines, printing presses, high precision machines, hydraulic equipment, electronic controls, castings, machine tools, and semiconductor manufacturing equipment TOSHIBA MACHINE CO.,LTD Shizuoka Numazu-shi
Principal products: Injection molding machines, die-casting machines, plastic extrusion machines, printing presses, high precision machines, hydraulic equipment, electronic contro...
Machinery & PartsMetal WorksPrecision Presses

Lintec Corporation Lintec is a leading Japanese manufacturer in the field of pressure-sensitive adhesive materials. We offer an extremely diverse range of products that includes adhesive papers and films for seals and labels, packaging tapes, construction materials, automotive products, tapes for use in semiconductor manufacture, optically functional films, and healthcare products.

We also develop and manufacture a variety of equipment optimally designed for use with our label materials and tapes; included are label-printing machines, packaging machines and electronic equipment. Our comprehensive approach to both soft (materials) and hard (equipment) aspects of the business ensures a productive synergy, enabling us to cater to diverse customer needs in the adhesives market.

Reflected in our company name, Lintec (formed from Lintec Corporation Tokyo Itabashi-ku
Lintec is a leading Japanese manufacturer in the field of pressure-sensitive adhesive materials. We offer an extremely diverse range of products that includes adhesive papers and f...
Printing & PublishingLabellingAdhesive Labels

Toray From Fashion Creation to Space Development. - Toray Group's major products in 12 categories are:
- Fibre & textiles
- Plastics
- Films
- Fine chemicals
- Water treatment membrane & system
- Carbon fibres & Composit materials
- Electronics
-  Pharmaceuticals & Medical products
- Ammenity
- Fashion & Apparels
- House & Engineering Toray Tokyo Chuo-ku
From Fashion Creation to Space Development. - Toray Group's major products in 12 categories are: - Fibre & textiles - Plastics - Films - Fine chemicals - Water treatme...
Beauty & Health ProductsFashionFabrics

Tsutsumi Jewelry Co Integrated jewelry company with a fully combined production and distribution system (from gem purchasing to jewelry manufacturing ,wholesaling and retail sale) Tsutsumi Jewelry Co Saitama saitama
Integrated jewelry company with a fully combined production and distribution system (from gem purchasing to jewelry manufacturing ,wholesaling and retail sale)
Beauty & Health ProductsFashionJewelry

Featured Products
Precision V Blocks Precision V Blocks
Obishi Keiki Seisakusho
2 block make up one set. Parallelism of base and V groove of the 2 blocks is assured. Very convenient for round objects, and other types of inspection or as supporting block (Rec.......
Laser Welders Laser Welders
MIYACHI Corporation
-Precision Welding with optical fibers : φ0.1 SI fiber or 0.2 SI fiber -Advanced Pulse shaping Function provides optimum welding schedule in FIXED -Power m.......
Electronic Component Mounting/Placement Machine CM402-M/L Electronic Component Mounting/Placement Machine CM402-M/L
Kawasho Electronics Corporation
Compact and high space productivity Ultra-high-speed placement is achieved by utilizing multiple heads and an extremely accurate recognition system.In addition, the main body has .......
Toyota Hiace Van Toyota Hiace Van
AutoX Japan
Super-GLE 5 Door, 4WD
Information Industries Use Information Industries Use
Toyo Knife Company, Ltd
Toyo knife is strongly advancing in this area by concentrating our continuous research efforts on ultra-fine particle tungsten carbide and precision processing technology of the hi.......

 
made in japan made in japan made in japan
made in japan
Matsuya for baby food and other products made in Japan
Baby food, Emmergency releif food, food for the elderly and hospitalized persons
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Your chance to become a distributor of products made in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Sell your products in Japan and beyond
Sell Your Products in Japan!
Display them Here
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Dried Hanabiratake Powder (Sparassis Crispa)
100% dried Hanabiratake Power
We are Selling in bulk for use as raw material to health supplement manufacturers.
Please contact us for more details
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Scissors and hand saw products made in Japan by Kabasawa
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan Ministry of Economy, Trade and Industry
You can get statistics on machinery, equipment and other industrial manufacturing
trends in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Japan External Trade Organization
Japan External Trade Organization promotes import and export trade in Japan
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan
Invest in Japan
Lots of investment opportunites in Japan.
made in japan
made in japan made in japan made in japan
made in japan made in japan made in japan
made in japan made in japan
made in japan made in japan made in japan
High-Precision Laser Soldering Robot System [UNIX-413LII] Noncontact soldering has the following advantages:
- no icicle is formed, 
- any impurities are not mixed into solder, and 
- It is appropriate for control of the solder amount or fine work such as fixing of a part that is difficult to be done. 

This system provides the next generation soldering method that is expected to be applied to lead-free soldering also. 

Since the amount of the wasted solder is far less than that of the Wave soldering or soldering iron system, this system contributes for reduction of industrial waste. In addition, it does not require consumables such as an iron tip and heater, so it is very easy to perform routine maintenance.

The laser diode (fiber coupling type) whose output is high (30 W) is used.

The CCD camera incorporated on the vertical axis onto which laser is irradiated shoots an image of the target point.

Since the laser oscillator section, output control unit and laser head are separated, you can design installation or configuration of the system as desired. This is a small device that uses laser diode. Soldering is available even for a minute work without missing the laser irradiation point. 

While observing an image of the point irradiated with laser on the monitor, teaching operation is available also. You can operate this system safely.

The LCD touch panel equipped with the backlight is used.You can intuitively check various settings such as the laser output power and irradiation time.

The long focal length optical system is adopted so that a large area from the lens to the work can be secured.

Parts around the optical system inside the laser head are shielded from the outside, and the air jet system is incorporated into the robot. Therefore, this structure does not allow any smoke from the soldering flux be blown into the inside easily. This robot can spray nitrogen also.

In Output Control mode, this system allows you to check the laser power and time with observing the waveform displayed on the LCD panel. It can store up to 32 output conditions also.

The dual structure of protective glass blocks any flying flux and/or solder ball. This glass is the sliding type, so it is easy to clean.
High-Precision Laser Soldering Robot System [UNIX-413LII]
Japan Unix Co., Ltd
Robot Hand Product Extraction Robot Hand
Robot Hand
Yutaka Electronics
Optical fiber & Metal cables + Designing and installation of optical fiber and metal cables for broadband network communication systems and installation of web access terminals.
  + Construction of conduits for drawing cables into customers' premises from public communication cable tunnels as well as installation of [Information BOX] and [CC BOX].
  + Construction and installation of digital exchange & transmission equipments and networks for controlling large volume data transmission.
  + 24-hours-a-day monitoring of networks throughout the country and maintenance, and repairs of failures, of all software, hardware and cable systems.
Optical fiber & Metal cables
TODENTSU
Flowers on Butterfly Contour This is a service, you send your jeans and we imprint the design. Original design is possible but you can also choose from our line up.

Please see our website for details
www.tatoo-jeans.com
We are looking for representatives in all countries.
Flowers on Butterfly Contour
Tattoo Jeans
About Us  |  Frequently Asked Questions  |  Our Services  |  Looking for Partners  |  Terms of Use  |  Privacy Policy
Copyright © 2009 Placade Japan Co., Ltd All Rights Reserved.
All logos and trademarks in this site are property of their respective owners