|
 |
|
NOVA electronics Inc
Grand Axe Bldg. 3Fl., 1-7-20 Uehara, Shibuya-ku Tokyo, Japan, 151-0064
Content is owned and copyrighted
to
NOVA electronics Inc
|
|
4-Axes Motor Control IC with Interpolation function
DESCRIPTION: MCX314As is a cost-effective high performance motion control IC designed for stepper motor or pulse type servo drivers with position, velocity and interpolation controls. This intelligent single chip offers s-curve/trapezoidal accelration/deceleration, target position and velocity changes on the fly, built-in 32bit linear/circular interpolation control, automatic home search and built-in integral type filter. Every function of the MCX314As is controlled by specific registers, which are command registers, data registers, status registers and mode registers.
SPECIFICATION: - Independent control of 4-axes
- Supports linear and bit pattern interpolation for any 2 or 3 axes
- Supports CW/CCW circular interpolation for any 2 axes
- Continuous interpolation to execute a series of interpolation processes, linear interpolation - circular interpolation - linear interpolation - …
- S-curve, trapezoidal or velocity contouring
- Triangle form prevension of linear/s-curve acceleration fixed pulse driving
- On the fly target position and velocity changes
- Maximum speed: 4MPPS, available for constant speed, linear/s-curve acceleration/deceleration driving
- Supports automatic deceleration including for non-symmetrical trapezoidal acceleration/deceleration driving
- Supports automatic home search that high-speed near home search - low-speed home search - encoder Z-phase search - offset drive
- Supports synchronous action, which performs any action from the factor of own axis to other axes
- Built-in integral type filter, selectable to enable or pass a signal through, and time constant from 8 types
- Selectable independent 2 pulse or 1 pulse/direction system
- 32-bit compare registers for each axis, can be used as software limit
- Read out of drive status by registers
- Selectable encoder input mode, quadrature or up/down pulse input
- Emergency stop input for all axes
- Connectable CMOS, TTL
- 144-pin LQFP package 5V operation
URL: www.novaelec.co.jp/eng/index4.html#MCX314As
|
|
 |
No video available
| Other Porducts from NOVA electronics Inc |
|
4-Axes Motor Control IC
Description:
MCX304 is a high performance low-cost motion control IC designed for stepper motor or pulse type servo drivers with position and velocity control. Fea...
|
|
|
2-Axes Motor Control IC
Description:
MCX302 is a high performance low-cost motion control IC designed for stepper motor or pulse type servo drivers with position and velocity control. Fea...
|
|
|
|
Sitemap
Japanese
Chinese
Korean
German
Spanish
French
Italian
Portugese
Sample
Products
